> For the complete documentation index, see [llms.txt](https://docs.gta.clothing/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.gta.clothing/plugins/creator-link/blender/garment-fitting.md).

# Garment Fitting

Bring a cloth from Marvelous Designer or any FBX, OBJ or glTF file onto the freemode body in Blender and fix how it sits

{% hint style="warning" %}
Garment Fitting is experimental, and the panel says so under its first line. Save your .blend file before big steps, and check the finished cloth on the ped and in game before you publish it.
{% endhint %}

## Introduction

Choose **Garment Fitting** under **Work On** at the top of Blender's **DCT** tab. It takes a cloth made outside GTA V, for example in Marvelous Designer, and works it towards a cloth the freemode ped can wear. The add-on calls the piece you work on the **garment**.

The work is split into five numbered stages that you go through in order:

1. **Setup**: say what you are making, bring in the cloth and add the freemode body.
2. **Fit**: place joint markers, align the cloth to the body and fit it on gta.clothing. A prop is snapped to its anchor instead.
3. **Fix**: check how the cloth sits, and fix where it is inside the body, stands off it or is stretched.
4. **Game Ready**: prepare the cloth for the game, see [Game Ready](https://docs.gta.clothing/plugins/creator-link/blender/game-ready.md).
5. **Add to Project**: add it to your Durty Cloth Tool project, see [Add to a Durty Cloth Tool Project](https://docs.gta.clothing/plugins/creator-link/blender/add-to-a-project.md).

Each stage shows a short status at the right of its header, for example **T-shirt · Male**, **Fitted**, **Validated** or **Not added**, and a tick once your work has moved past it. The stage that holds your next step opens by itself, and the finished ones fold. You can open any stage again with the arrow next to it.

The first line of the panel always says what to do next, for example **Next: run the fit check under Fix.** It leads you through the steps in this order: markers, **Align to Body**, **Fit on gta.clothing** or the fit check, **Push Out of Body**, **Prepare Garment**, **Combine Materials**, the weights, **Generate LODs**, **Validate** and **Add to Project**. The button of the next step is drawn larger than the others.

<figure><img src="https://2130288373-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FRsXe3tqSiAvM8iKYjngE%2Fuploads%2Fgit-blob-c8679d02831895b643aad991fe4cc847dafb5449%2Fgarment-stages.png?alt=media" alt="Garment Fitting with the next step on the first line and the five stages Setup, Fit, Fix, Game Ready and Add to Project, the finished ones folded with a tick and their status, and the closed Backups section."><figcaption><p>The five stages: finished ones fold with a tick, and the stage of the next step opens.</p></figcaption></figure>

### When to use it

* You made clothing in Marvelous Designer, CLO or another 3D app and want the freemode ped to wear it: a top, hoodie, jacket, coat or dress, trousers, shorts or a skirt, shoes or sandals, a mask, a bag or parachute, body armour, or a prop such as a hat or glasses. See [#garment-types](#garment-types "mention").
* You bought or downloaded a 3D clothing model and need to see where it pokes through the freemode body, and fix it in Blender.
* You want a guided path from a loose 3D model to a cloth in your Durty Cloth Tool project, with checks along the way.

### When something else fits better

* To change a cloth that is already in your project, use [Live Preview and Models](https://docs.gta.clothing/plugins/creator-link/blender/live-preview-and-models.md).
* If you make the clothing in Marvelous Designer and have Durty Cloth Tool Ultimate, the [Marvelous Designer plugin](https://docs.gta.clothing/plugins/creator-link/marvelous.md) lets you drape it on the GTA body there and add it to your project without Blender.
* If you would rather not work in Blender, Durty Cloth Tool's own [3D model import](https://docs.gta.clothing/basics/useful-to-know/import-and-export-formats.md#id-3d-model-import-experimental) (Experimental, Ultimate) adds GLB, glTF, FBX and OBJ clothing to a project with its own fitting controls.
* To turn a whole character into a ped of its own, use [Custom Ped](https://docs.gta.clothing/plugins/creator-link/blender/custom-ped.md).

### What you need

* The add-on installed in Blender. **Setup**, **Fit** (except **Fit on gta.clothing**) and **Fix** run in Blender and work without Durty Cloth Tool and without an account.
* For **Add Freemode Body**: a free gta.clothing sign-in the first time you use it, and Blender 5.2 or later. With an older Blender, use a body file of your own.
* For **Fit on gta.clothing** and **Transfer Weights**: the freemode body from **Add Freemode Body**, Blender's online access, your gta.clothing sign-in and fits left today, see [#fit-on-gta.clothing](#fit-on-gta.clothing "mention").
* [Sollumz](https://docs.sollumz.org) for **Generate LODs** and for adding the cloth to a project.
* Weights for the freemode skeleton before you add the cloth to a project. **Fit on gta.clothing** and **Transfer Weights** give the cloth the freemode body's weights, or you weight it yourself, see [Game Ready](https://docs.gta.clothing/plugins/creator-link/blender/game-ready.md#weight-the-cloth). Props need no weights.

{% hint style="info" %}
**Fit on gta.clothing** and **Transfer Weights** use a number of fits each day that depends on your Durty Cloth Tool plan, see [#fits-per-day](#fits-per-day "mention"). Without fits left, check and fix the cloth with the tools that run in Blender. Garment Fitting makes clothing for the freemode peds; clothing for custom peds is not supported.
{% endhint %}

## Garment types

**Garment Type** under **Setup** says what you are making. It sets the slot the cloth goes into, how its markers are found, the regions the tools offer and what is checked. The line below the type describes it, and some types add a hint with what to know about them.

| Garment Type                           | Goes into                                                                                                                       | Good to know                                                                                                                 |
| -------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------- | ---------------------------------------------------------------------------------------------------------------------------- |
| **T-shirt**, **Long Sleeve**, **Vest** | **Top (jbib)**, or **Undershirt (accs)** under **Options**                                                                      | Short sleeves, sleeves to the wrists, or no sleeves.                                                                         |
| **Hoodie**                             | **Top (jbib)**                                                                                                                  | **Auto Markers** finds the neck below the hood, and **Snug to Body** leaves the hood alone.                                  |
| **Open Jacket**                        | **Top (jbib)**                                                                                                                  | Worn open: **Prepare Garment** never joins its two fronts.                                                                   |
| **Long Jacket or Tunic**               | **Top (jbib)**                                                                                                                  | Long sleeves, reaches below the hips.                                                                                        |
| **Long Coat**                          | **Top (jbib)**                                                                                                                  | Reaches to the knees or below. Its tails hang free and follow both legs.                                                     |
| **Dress**                              | **Top (jbib)** as one cloth, or a top and a skirt                                                                               | See [#dresses-skirts-and-long-coats](#dresses-skirts-and-long-coats "mention").                                              |
| **Pants**                              | **Legs (lowr)**                                                                                                                 | Trousers that reach the ankles.                                                                                              |
| **Shorts**, **Skirt**                  | **Legs (lowr)**                                                                                                                 | **Shows Skin** is on, see [#bare-legs-and-feet](#bare-legs-and-feet "mention").                                              |
| **Shoes**, **Sandals**                 | **Shoes (feet)**                                                                                                                | No markers and no **Align to Body**: check that they sit on the ped's feet after the import. Sandals have **Shows Skin** on. |
| **Mask**                               | **Mask (berd)**                                                                                                                 | One marker, at the head.                                                                                                     |
| **Body Armour**                        | **Armour (task)**                                                                                                               | Worn over the top, such as body armour or a plate carrier.                                                                   |
| **Bag or Parachute**                   | **Bag (hand)**                                                                                                                  | A backpack, bag or parachute worn on the back.                                                                               |
| **Hat**, **Glasses**, **Ear Piece**    | **Head Prop (p\_head)**, **Eyes Prop (p\_eyes)**, **Ears Prop (p\_ears)**                                                       | Props, see [#props](#props "mention").                                                                                       |
| **Watch**, **Bracelet**                | **Left Wrist Prop (p\_lwrist)** for a watch, **Right Wrist Prop (p\_rwrist)** for a bracelet; the other wrist under **Options** | Props, see [#props](#props "mention").                                                                                       |

Every type except the props is fitted to the body: with **Fit on gta.clothing**, or by hand under **Fix**.

### Dresses, skirts and long coats

The cloth between the legs of a skirt, a dress or the tails of a long coat must not split when the ped walks. **Fit on gta.clothing** and **Transfer Weights** take care of this for you. When you weight such a cloth yourself, use **Bridge Thigh Weights** under **Game Ready**.

A dress goes into the game in one of two ways:

* **One piece**: the dress goes into the **Top (jbib)** slot as one cloth. Players wear bare legs in the **Legs (lowr)** slot with it.
* **Two pieces**: **Split at Waist** under **Fit** cuts the dress at the waist. The dress keeps the top, and a new garment named after it, ending in **Skirt**, gets the skirt, set up for the **Legs (lowr)** slot. Split after **Fit on gta.clothing**, so both pieces keep the fit and its weights, then choose each piece under **Setup** to finish it and add it to your project, one after the other. Each piece can then be worn with other clothing.

### Bare legs and feet

The **Legs (lowr)** slot replaces the ped's legs, and the **Shoes (feet)** slot replaces its feet, so the bare legs below shorts or a skirt, and the bare feet in sandals, must be part of the cloth. For **Shorts**, **Skirt** and **Sandals**, **Shows Skin** is on, so the game colours the skin with the ped's skin tone, see [Skin Tone Data](https://docs.gta.clothing/game-mechanics/skin-tone-data.md). The add-on adds the cloth; the bare legs or feet come from Durty Cloth Tool's own tools, as your Durty Cloth Tool plan allows.

### Props

Hats, glasses, ear pieces, watches and bracelets are props: rigid pieces that hang from one bone in the game, the head for hats, glasses and ear pieces, and the forearm at the wrist for watches and bracelets. A prop keeps its shape: it is not fitted to the body and needs no weights.

* Under **Fit**, **Snap to Anchor** puts the prop where it usually sits on the freemode body: a hat onto the head, glasses in front of the eyes, ear pieces at the ears, a watch or bracelet around the wrist. Move, turn or scale it by hand from there.
* **Fix** has nothing to do for a prop, and **Game Ready** shows its anchor instead of the skeleton and the weights. **Validate** warns when the prop's middle is far from its anchor.
* When it is added, the prop hangs from its anchor bone, placed from Durty Cloth Tool's freemode skeleton made from your game files, and keeps its position relative to it.

See [#snap-a-prop-to-its-anchor](#snap-a-prop-to-its-anchor "mention").

## How the tools work

* The tools change only the garment chosen under **Setup**, the markers and the body they added. Your other objects stay as they are.
* Every step that changes the garment can be undone with **Ctrl+Z**. Before such a step the add-on also keeps a backup of the garment's shape in the .blend file, see [#backups](#backups "mention").
* After each step the panel says what it did, for example **Moved 412 vertices. Inside the body: 144 before, 0 now.**
* Each tool is one button with a **?** next to it that explains it. Settings you rarely change sit in closed **Options** sections below their step, and tools most cloths do not need sit in closed sections, such as **Problems** under **Fix**. Open one with the arrow next to it.
* Each garment keeps its own **Garment Type**, slot, **Avatar** and **Shows Skin**, so they come back when you choose it again.
* **Prepare Garment** and **Combine Materials** can take a while. They show their progress in Blender's status bar, for example **Prepare Garment: Joining the seams (2 of 3). Esc cancels at the end of this stage.** **Esc** stops them once the running stage is done and puts the garment back as it was. Meanwhile the other tools wait and say **Prepare Garment is running. Wait for it, or press Esc to stop it.**
* The tools work in **Object Mode** on a mesh without shape keys. A greyed-out button says why it is unavailable.

## Setup

<figure><img src="https://2130288373-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FRsXe3tqSiAvM8iKYjngE%2Fuploads%2Fgit-blob-7002ad5f3e31faf01b827472be1b18b6acc2459c%2Fgarment-setup.png?alt=media" alt="The Setup stage of Garment Fitting with Male, the Garment Type Hoodie and its note, the Avatar and Source Pose, the imported hoodie jbib_016_u with 13143 vertices and one material, and the male freemode body added."><figcaption><p>Setup with an imported hoodie and the male freemode body.</p></figcaption></figure>

### Choose what you are making

* **Male** or **Female**: the freemode ped the cloth is for.
* **Garment Type**: what kind of cloth it is, see [#garment-types](#garment-types "mention").
* **Avatar**, for types with markers: the avatar the cloth was draped on, when you know it. Its joints then become the markers.
  * **Not Known**: **Auto Markers** reads the markers from the cloth's shape.
  * **Imported with the Garment**: the rigged avatar exported with the cloth, for example in an FBX from Marvelous Designer or CLO. **Import Garment** keeps where its joints were and chooses this by itself.
  * A stock avatar the add-on knows, such as **Manne (Male, A-pose)**, the male template avatar of Marvelous Designer and CLO. Its markers fit the avatar at its default size and pose: check them if you resized or reposed it.
* **Source Pose**, for tops and trousers while the **Avatar** is **Not Known**: the pose of the avatar the cloth was made on. **A-pose** (the arms point down at an angle, as the ped stands in game), **T-pose** (the arms point straight out) or **Custom** (another pose: check the markers and move them to the joints by hand).
* **Options** (closed), where the type needs it:
  * **Slot**, for a type that may go into more than one slot: a top as **Top (jbib)** or **Undershirt (accs)**, a watch or bracelet on the left or right wrist.
  * **Open Front**, for tops: the cloth is worn open, and **Prepare Garment** never joins its two fronts. It is on for **Open Jacket**.

The gender and the slot are also what the cloth gets when you add it to your project, so set them before you add.

### Bring in the cloth

* **Import Garment** reads FBX, OBJ, GLB and glTF files and joins all meshes of the file into one object, in metres. The file browser offers three options:
  * **Avatar Stood on the Ground** (on by default): moves a cloth that was made on an avatar standing at height 0, as in Marvelous Designer, down to the ped. Turn it off when the file already sits on the ped.
  * **Turn Upright** (on by default): turns a cloth that lies on its back or faces backwards so it stands as the ped does.
  * **Unit**: the unit the file was saved in, **Automatic** by default. **Automatic** brings files in centimetres and millimetres, as Marvelous Designer exports them, to metres, and warns you when it had to choose an unusual unit. A file exported normalised to 1 m at its longest side is scaled to body size, and the panel says **... Its longest side was 1 m, as in a normalised export, so it was scaled by ... to body size.** If the size looks wrong, import the file again and choose the **Unit** yourself.
* **Use Selected** works on a mesh that is already in your scene. Select it first.

When the file name names a garment type in whole words, for example `black_hoodie.fbx`, **Import Garment** sets the **Garment Type** from it and says, for example, **... Garment Type set to Hoodie from the file name. Change it if that is wrong.** A **Garment Type** you picked before the import stays as you chose it.

Below the **Garment** field the panel shows how many vertices and materials the cloth has.

{% hint style="info" %}
When the file still holds the avatar the cloth was draped on, as an FBX from Marvelous Designer can, **Import Garment** leaves the avatar out and says **Imported ... without the avatar that came with it.** When that avatar is rigged, the add-on keeps where its joints were for the markers and says **Imported ... and kept the joints of the avatar exported with it for the markers.** A cloth that carries its own skin weights keeps its armature, and its largest mesh becomes the garment.
{% endhint %}

### Add the freemode body

* **Add Freemode Body** downloads the freemode body of the chosen gender from gta.clothing for your signed-in account and adds it to the scene as its own object. Each body version is downloaded once and kept in the add-on's folder, so it also works offline afterwards, and **Import Garment** adds a kept body by itself. The tools measure against the body and never change it.
* **Use a Body File** adds a body from a GLB, glTF, FBX or OBJ file instead, in metres and in the game's pose. **Fit on gta.clothing** and **Transfer Weights** need the freemode body from **Add Freemode Body**.

The **Body** line shows which body is in use: the gender and version of the freemode body, or the name of your body file.

### How the freemode body shows

Once a body is in the scene, the closed **Options** below the body buttons change how the freemode body shows while you work:

* **Body Cut**: which skin of the upper body shows, as under clothing of that cut, for example **Full Body**, **Short Sleeves** or **Long Sleeves, Open Neck**.
* **Arms** and **Legs**: **Solid** (shown as usual), **Wire** (a wireframe, so the clothing shows through) or **Hidden**.

Only what you see changes: fits and checks always use the standard body. These options need the **Reference Data Pack**, which **Add Freemode Body** downloads with the freemode body for your signed-in account. Without it, and for a body from a file, they are greyed out and say **Body Cut, Arms and Legs need the Reference Data Pack.**

## Fit

<figure><img src="https://2130288373-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FRsXe3tqSiAvM8iKYjngE%2Fuploads%2Fgit-blob-8bab82c9238b6b2a47088cf68e0fa23532076948%2Fgarment-fit.png?alt=media" alt="The Fit stage with all 11 markers placed, Align to Body complete and Fit on gta.clothing ready."><figcaption><p>All 11 markers are placed and the cloth is aligned to the freemode body. Fit on gta.clothing is the next step.</p></figcaption></figure>

### Markers

The markers stand for the ped's joints. Which ones a cloth has depends on its type:

* tops, dresses, coats and body armour: the neck, chest, pelvis, shoulders, elbows, wrists and hips;
* trousers, shorts and skirts: the pelvis, hips, knees and ankles;
* bags and parachutes: the neck, chest, pelvis, shoulders and hips;
* masks: the head;
* shoes, sandals and props: none. The panel says **This garment type needs no markers.**

**Align to Body** and the regions of the **Fix** tools are found from the markers.

1. Select **Auto Markers**. With an **Avatar** chosen under **Setup**, the markers go onto its joints, in the pose the cloth was draped in. Otherwise the add-on reads them from the cloth's shape (tops and trousers), or, for a mask or a bag, places them on the body's joints for you to move onto the matching points of the cloth. **Markers placed** shows how many are in place.
2. Look at each marker in the viewport and move any that is off, as you move any object in Blender. Lines join the markers in the 3D view: green while they look right, orange when something looks wrong. The panel then says what, for example **The left and right markers do not mirror each other. Mirror L to R makes them match.**
3. **Mirror L to R** copies the markers of the ped's left side to its right side, once one side is right.

An avatar's markers fit the cloth only where it was imported. Once the cloth has moved, for example after **Align to Body** or a fit, choose **Not Known** under **Setup** to place the markers again, or move them by hand.

Under **Options**, **Marker Size** changes how large the markers are drawn, **Save Pose Preset** keeps the marker layout under a name in the add-on's folder, and **Load Pose Preset** places it again for a similar cloth.

### Align to Body

**Align to Body** moves and turns the cloth so its markers sit on the joints of the freemode body, then turns each arm (or leg) onto the body's. Run **Auto Markers** first and move any marker that is off. The **Fix** tools measure against the body, so they wait for this step and say **Align the garment to the body under Fit first.** They wait again when you move a marker afterwards. Once the step is done, its button shows a tick.

The line below the button says where the body's joints come from: **Joints: from the freemode body.**, from your game files through Durty Cloth Tool, or estimated from the body's shape (for a body file without Durty Cloth Tool connected). After the step the panel says what it did, for example **Aligned to the body: moved 2.2 cm, turned 1.1°, scaled to 100 %, 2 arms or legs turned. The markers are 17 mm from the joints on average.**

Under **Options**:

* **Keep Size** (on by default): **Align to Body** only moves and turns the cloth. Turn it off to also scale the cloth to the body.
* **Model in T-pose**, for tops only: for a top made in **T-pose**, **T-pose to A-pose** lowers the arms. With the body's joints known, the arms go onto the body's arms; otherwise to the **Arm Angle** below the horizontal (40° by default). The markers follow. **Align to Body** turns the arms onto the body's too, so you rarely need this step on its own.

If the markers would need the cloth scaled or turned far, the step stops with **The markers do not fit the body's joints without scaling or turning the garment far.** Check the markers, then align again.

### Fit on gta.clothing

**Fit on gta.clothing** fits the cloth, as it sits after **Align to Body**, on gta.clothing. It comes back in the game's pose, with the freemode body's weights, and moved out of the body where it was inside. The add-on keeps a backup first, so **Back One Step** puts the cloth back. After the fit the panel says, for example, **Fitted to the body: in the game's pose, with weights for 9 bones.**, or lists what is still wrong, such as parts still inside the body. You can also skip it and fit the cloth by hand under **Fix**.

The first time you use **Fit on gta.clothing** or **Transfer Weights**, the add-on asks for your consent once (**Upload for Fitting**):

<figure><img src="https://2130288373-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FRsXe3tqSiAvM8iKYjngE%2Fuploads%2Fgit-blob-fa6606da1b424fae20886cb0b8ef2614489a9c21%2Fgarment-fit-consent.png?alt=media" alt="The Upload for Fitting question with Upload and Fit and Cancel."><figcaption><p>Review the Upload for Fitting question before choosing Upload and Fit.</p></figcaption></figure>

**Upload and Fit** agrees once, see [Privacy](https://docs.gta.clothing/plugins/creator-link/privacy.md#garment-fitting-from-blender). To withdraw, turn off **Upload Garments for Fitting** under **Settings > Privacy**; the add-on then asks again before it sends anything.

While the fit runs, a progress bar shows its stages, for example **Sending the garment**, **Checking the garment** and **Fitting**, and **Cancel** stops it.

<figure><img src="https://2130288373-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FRsXe3tqSiAvM8iKYjngE%2Fuploads%2Fgit-blob-297de2cd9189981f7cc5bccd2a872ed88fa648df%2Fgarment-fit-service.png?alt=media" alt="The Fit stage with Fitting in progress and a Cancel button."><figcaption><p>While the fit runs, the panel shows its progress and lets you cancel.</p></figcaption></figure>

#### Fits per day

Every fit, with **Fit on gta.clothing** or **Transfer Weights**, uses one of today's fits. **Fits left today** shows how many you have left. How many fits you get each day depends on your Durty Cloth Tool plan:

| Plan         | Fits a day |
| ------------ | ---------- |
| **Free**     | 10         |
| **Advanced** | 30         |
| **Ultimate** | 100        |

* A fit you cancel before gta.clothing starts it does not count, and neither does one gta.clothing could not start; the panel says so. Once a fit has started, it counts even when you cancel it.
* When none are left, the buttons say **No more fits can be started today.**, with when more are available. A new day's fits are available after midnight UTC.

#### Options

* **Clearance (mm)** (3.0 by default): how far the cloth stays outside the body where it is moved out.
* **Move Out of Body** (on by default): move every part that is inside the body, or too close to it, out to the clearance.
* **Deepest Move (mm)** (30 by default): parts deeper inside the body than this stay where they are.
* **Seam Gap (mm)** (1.5 by default): panel edges closer than this count as one seam, so both sides get the same weights. 0 turns it off.
* **Match Proportions** (off by default): also stretch and resize the cloth's arms and legs to the body's joints, for a cloth made on another avatar.
* **Proportion Strength** (100 % by default, from 0 to 100 %), shown while **Match Proportions** is on: how far **Match Proportions** goes. 100 % gives the cloth the body's proportions; less keeps some of its own.

#### Repaired weights

After **Fit on gta.clothing** or **Transfer Weights**, the panel can say where weights that tore the cloth in common poses were repaired, one line per area: the neck and collar, the shoulders and arms, the chest and back, the hips and thighs, or the knees, calves and feet. For example **Weights at the shoulders and arms tore the garment in common poses and were repaired. Check that area in motion.** Check those areas on the moving ped, for example with **Check Tears** under **Fix** and in Durty Cloth Tool's 3D Preview after the add.

A detailed cloth whose panels are not joined yet can ask for **Prepare Garment** first, see [#troubleshooting](#troubleshooting "mention").

### Split a dress at the waist

For a **Dress**, **Split at Waist** appears under **Fit**, after **Fit on gta.clothing**. It cuts the dress into a top and a skirt and says, for example, **Split Summer Dress at the waist: Summer Dress Skirt is the skirt, for the Legs slot. Choose it under Setup.** See [#dresses-skirts-and-long-coats](#dresses-skirts-and-long-coats "mention").

### Snap a prop to its anchor

For a **Hat**, **Glasses**, **Ear Piece**, **Watch** or **Bracelet**, **Fit** holds one step instead of the markers and the fit:

1. Add the freemode body under **Setup**.
2. Select **Snap to Anchor**. The panel says what it did, for example **Moved the prop onto its anchor (Head Prop (p\_head)): 64.8 cm, turned 0.0°.**, and the button shows a tick.
3. Move, turn or scale the prop by hand until it sits as it should, then go on under **Game Ready**.

<figure><img src="https://2130288373-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FRsXe3tqSiAvM8iKYjngE%2Fuploads%2Fgit-blob-51ebd3d9dea42f5b8078af9fe46e36338c71a0b2%2Fgarment-prop-snapped.png?alt=media" alt="A black cap with metal grommets snapped onto the head of the body in Blender&#x27;s 3D view, next to the Fit stage with Snap to Anchor ticked and its anchor Head Prop (p_head)."><figcaption><p>A cap snapped to its anchor on the head. Move it by hand from there.</p></figcaption></figure>

## Fix

<figure><img src="https://2130288373-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FRsXe3tqSiAvM8iKYjngE%2Fuploads%2Fgit-blob-03d11e0d4f28adb0ad48284c27c1d0950ef913b5%2Fgarment-fix.png?alt=media" alt="The Fix stage after the fit check: the regions with their measured clearance and the Usual column, vertices inside the body, Push Out of Body as the next step, the open Problems section with its colours, and the closed sections Region Tools, Fix by Hand and Tears."><figcaption><p>Fix starts with the fit check. Here parts are inside the body, so Push Out of Body is next.</p></figcaption></figure>

**Run Fit Check**, **Push Out of Body** and **Fix Spikes** are always in view. The other tools sit in four closed sections below them: **Problems**, **Region Tools**, **Fix by Hand** and **Tears**. Open one with the arrow next to it. The **Fix** tools measure against the body, so they wait for **Align to Body**; props keep their own shape and are placed with **Snap to Anchor** instead.

### Run Fit Check

**Run Fit Check** measures how far each region of the garment stands off the body, in millimetres: the middle value and the range of most of its vertices, for example **29 (19 to 33)**. Negative values are inside the body, and a warning sign marks a region with parts inside it. Below the table the panel says how many vertices are inside the body, and gives advice where it can, for example **The shoulders stand off the body: Snug to Body (Region Tools) with Shoulders brings them down.**

The **Usual** column shows how far game clothing of this kind sits from the body in each region, from gta.clothing, so you can compare. In a narrow sidebar the usual range goes on a dimmed line under each region instead, for example **Usual: 19 (5 to 32)**. It needs your sign-in and Blender's online access; without them the panel says **Sign in and allow online access to compare with game clothing.**

Run the fit check before and after the steps below, so you see what each one changed.

<figure><img src="https://2130288373-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FRsXe3tqSiAvM8iKYjngE%2Fuploads%2Fgit-blob-44654b298ed56ad12e3b2eb2f8acbe8ac7d9a0d3%2Fgarment-fit-check.png?alt=media" alt="The fit check after Push Out of Body: the regions with their measured clearance next to the usual clearance of game clothing, and the vertices still inside the body."><figcaption><p>The fit check again after Push Out of Body.</p></figcaption></figure>

### Push Out of Body

**Push Out of Body** moves every part of the garment that is inside the body, or closer than the **Gap (mm)** above it (4.0 by default), out to the gap, without creasing the cloth around it: the push blends into the surrounding cloth. Parts deep inside the body stay where they are, and the panel says how many, for example a sleeve that goes through the body: fix those by hand. Vertices in the vertex group `DCT Pinned`, and masked vertices, also stay.

**Region**, above it, chooses the part of the garment it moves; the rest stays as it is:

* **Whole Garment** (default): every part of the garment.
* **Torso Only**: the shoulders, chest, back, waist, hips and neck. Sleeves and legs stay as they are.
* **Torso and Arms**: the torso and the sleeves. Legs and everything else stay as they are.

<figure><img src="https://2130288373-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FRsXe3tqSiAvM8iKYjngE%2Fuploads%2Fgit-blob-2739cc83924d51cf99b2f51a2230aab014bb2da4%2Fgarment-fit-view.png?alt=media" alt="A burgundy hoodie on the body in Blender&#x27;s 3D view after Align to Body and Push Out of Body, with its joint markers joined by green lines."><figcaption><p>The hoodie after Align to Body and Push Out of Body. Green lines join the markers.</p></figcaption></figure>

### Fix Spikes

After a fit, single vertices can jump away from the cloth around them and stick out as spikes. **Fix Spikes** pulls them back to where the cloth around them belongs, compared with the garment's shape from before fitting. The rest of the cloth stays exactly where it is, nothing goes into the body, and open edges, vertices in `DCT Pinned` and masked vertices stay. The panel then says, for example, **Moved 37 vertices back to where the cloth around them belongs (at most 12.4 mm).**, or **Nothing had jumped away from the cloth around it; the garment is as it was.** **Back One Step** undoes it, see [#backups](#backups "mention").

**Fix Spikes** needs the backup from before fitting, with the garment's current vertices. Without it, for example after **Prepare Garment** or an edit that adds or removes vertices, the button is greyed out and says why.

### Problems

Open **Problems**. **Show Problems** colours the garment while you work:

* **red**: inside the body;
* **yellow**: too close to the body;
* **purple**: stretched compared with its original shape;
* **blue**: a floating shoulder that stands off the body.

The refresh button next to it colours the garment again after a change. Select **Show Problems** again to remove the colours.

<figure><img src="https://2130288373-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FRsXe3tqSiAvM8iKYjngE%2Fuploads%2Fgit-blob-4c2cec4846d73410ce1dbed6e480f039293a5320%2Fgarment-problems.png?alt=media" alt="The hoodie coloured by Show Problems in Blender&#x27;s 3D view: blue where it floats, purple stretched parts and yellow where it is too close to the body, with the body showing through at the shoulders where the hoodie is still inside it."><figcaption><p>Show Problems colours the cloth while you work.</p></figcaption></figure>

### Region Tools

Open **Region Tools** and pick a **Region** (**Shoulders**, **Upper Arms**, **Forearms**, **Cuffs**, **Chest**, **Back**, **Waist**, **Hips**, **Neck**, **Legs** or **Head**; only the ones your garment type covers can be used), then:

* **Snug to Body** brings that region closer to the body, down to its **Gap (mm)** (8.0 by default). **Amount** says how much of the way it moves: 1 moves it all the way, the default 0.80 most of it. Coat tails, skirts and hoods that hang free stay as they are.
* **Relax Stretched** eases stretched parts of the region back towards their original size.

The edges of the region blend in, so the rest of the cloth is not cut off sharply.

### Fix by Hand

For what the tools cannot fix, open **Fix by Hand** and sculpt the cloth with the body as a guide:

1. Under its **Options**, set the brush **Radius (cm)** (6.0 by default) and **Strength** (0.50), and keep **Mirror X** on to sculpt both sides at once.
2. Select **Start Sculpting**. Blender switches to Sculpt Mode with the Grab brush, and the body shows as a wireframe.
3. Drag to move the cloth. **Show Problems** and the region tools stay available while you sculpt.
4. Select **Accept** to keep the shape, or **Cancel** to put back the shape from before the session.

With **Keep Out of Body** on, **Accept** moves what you pushed into the body back out to the gap of **Push Out of Body**. The panel then says how many vertices moved and how many are inside the body before and after.

<figure><img src="https://2130288373-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FRsXe3tqSiAvM8iKYjngE%2Fuploads%2Fgit-blob-d0b2129fee1d6226d36dd791c49215c591743be6%2Fgarment-sculpting.png?alt=media" alt="Fix during a sculpt session, with Accept, Cancel, Keep Out of Body, the problem colours and the region tools."><figcaption><p>A sculpt session: Accept keeps the shape, Cancel puts it back.</p></figcaption></figure>

### Tears

Open **Tears**. **Check Tears** poses the garment's armature and reports where the cloth tears. The vertices that tear go into the vertex group `DCT Tears`, so you can select and fix them. It needs the garment on an armature with weights, for example after [Game Ready](https://docs.gta.clothing/plugins/creator-link/blender/game-ready.md#weight-the-cloth), and no other modifier that changes its shape.

* **With the Reference Data Pack**, which **Add Freemode Body** downloads with the freemode body (see [#how-the-freemode-body-shows](#how-the-freemode-body-shows "mention")), the garment is posed through the game's own poses, such as standing, walking, running, sitting and climbing. The panel says how many of them tear nothing, for example **... of ... game poses tear nothing.**, and lists the poses where points tear and how far they stretch.
* **Without it**, the garment is posed through a few test poses (arms up, arms forward, legs forward and a twist), and the check reports, for each pose, where seams between the panels open. When the cloth has no open seams left, for example after **Prepare Garment** joined them, the check says that none can open: then check the cloth moving on the ped in Durty Cloth Tool's 3D Preview.

In the game's poses, a **Stretch** line also compares how much of the cloth stretches far enough to tear in its worst pose with the game's own clothing of the same gender and kind. It says whether your cloth stretches no more than a typical piece, more than typical, more than nearly all pieces (check the areas in `DCT Tears`), or more than any piece, which is likely a real tear to fix. Like the **Usual** column of the fit check, the comparison needs your sign-in and Blender's online access; otherwise the line is left out.

## Backups

Before each step that changes the garment, the add-on keeps a copy of its shape in the .blend file: the one from before the first fitting step and the newest ones, up to three. The closed **Backups** section after the five stages holds them, because every stage can change the garment:

* **Backups kept** shows how many there are, for example **Backups kept: 1 of 3**.
* **Back One Step** puts back the shape from before the last step that changed the garment. A fit from gta.clothing is such a step.
* **Restore Pre-fit** puts back the shape from before the first fitting step.
* **Remove Backups** removes the garment's backups from the .blend file.

## Tips

* Follow the next-step line. It moves on as you finish each step, and it tells you when the cloth is inside the body.
* Run the fit check before and after **Push Out of Body** and **Snug to Body**, so you see what each step changed.
* Keep **Show Problems** on while you sculpt; the colours show at a glance where you still need to work.
* If **Auto Markers** places the arm markers badly, check the **Garment Type** first: a T-shirt has short sleeves, a Long Sleeve top sleeves to the wrists.
* Draped on a stock avatar in Marvelous Designer? Export the FBX with the avatar, or choose the avatar under **Setup**, and the markers start on its joints.
* Clothing you draped on the GTA body with the [Marvelous Designer plugin](https://docs.gta.clothing/plugins/creator-link/marvelous/drape-on-the-gta-body.md) already has the game's proportions. Export it there with **Export a file**, see [Game Ready](https://docs.gta.clothing/plugins/creator-link/marvelous/game-ready.md#export-a-file-for-other-tools).
* Save a pose preset for a cloth you will make again in other colours or sizes.

## Limits

* Garment Fitting is experimental. Results depend on how the cloth was made, so check every cloth on the ped.
* The supported types are the ones listed under [#garment-types](#garment-types "mention"). Props are placed by hand, not fitted.
* The add-on knows the joints of the stock avatars it lists under **Avatar**; for another avatar, choose **Not Known** or export the FBX with its rigged avatar.
* The tools work on one garment at a time, in Object Mode, on a mesh without shape keys.
* **Fit on gta.clothing** and **Transfer Weights** take a cloth with at most 120,000 vertices and 240,000 triangles, and count against your fits per day.

## Troubleshooting

* **Switch to Object Mode first.**: leave Edit Mode, Weight Paint or another mode.
* **The garment has shape keys. Apply or remove them first.**: apply or remove the shape keys, for example in Object Data Properties.
* **The garment is not in the current view layer.**: show the garment in the current view layer.
* **Only FBX, OBJ, GLB and glTF files can be imported.** or **The file holds no mesh.**: export the cloth again in one of these formats, with its mesh.
* **... it does not have the size of this kind of garment.** after the import: import it again and choose the **Unit**, or check the **Garment Type**.
* **The garment is too small or too flat for markers. Check that it is in metres.**: import it with **Import Garment** and the right **Unit**, or scale it to metres.
* **The garment does not look like a top.** or **No trouser legs were found.**: check the **Garment Type**, or place the markers by hand.
* **No sleeves were found. Choose Vest, or place the arm markers by hand.**: choose **Vest** for a sleeveless top, or move the arm markers to the joints yourself.
* **This avatar is not known for the garment: it was not imported with its rigged avatar.**: choose another **Avatar**, or **Not Known**.
* **The avatar lacks a marker this type needs.**: choose **Not Known**, or place that marker by hand.
* **The garment has moved since it was imported, so the avatar's markers no longer fit it.**: choose **Not Known**, or move the markers by hand.
* **Align the garment to the body under Fit first.**: run **Align to Body**, and again after you moved a marker.
* **Sign in with gta.clothing first (Get Connected), or use a body file.**: sign in once under **Get Connected** to download the body, or use **Use a Body File**.
* **Blender's online access is off and no body was downloaded before.**: allow online access in **Edit > Preferences > System > Network**, or use a body file.
* **gta.clothing could not be reached.**: check your internet connection, or use a body file.
* **This Blender cannot read the compressed freemode body.**: use Blender 5.2 or later, or **Use a Body File**.
* **Fitting needs the freemode body from gta.clothing: Add Freemode Body under Setup.**: a body from a file cannot be used for **Fit on gta.clothing** and **Transfer Weights**.
* **No more fits can be started today.**: wait until more are available, see [#fits-per-day](#fits-per-day "mention").
* **... open edges crowd one spot of the garment ...**: the spot is selected; press **Tab** to see it. Where several panels meet and their seams are not joined yet, run **Prepare Garment** under **Game Ready**, then fit again. Small loose parts such as buttons, or stitching lying on the cloth, you remove or merge (**Merge by Distance**), or set **Seam Gap (mm)** to 0 under the **Options** of **Fit on gta.clothing**.
* **The garment is too detailed to fit: at most 120,000 vertices and 240,000 triangles.**: reduce it, for example with a Decimate modifier.
* **The garment changed while it was being fitted, so the result was not applied.**: fit again, and leave the cloth as it is until the fit is done.
* **The garment does not lie on the body, so nothing changed.**: run **Align to Body** first.
* **Props are not fitted to the body and need no weights: they move with their anchor.** or **Props keep their own shape: place them with Snap to Anchor and by hand.**: place the prop with **Snap to Anchor** under **Fit**.
* **The body has no head to snap the prop to.** or **The body has no arm to snap the prop to.**: add the freemode body with **Add Freemode Body**.
* **Nothing lies on one side of the waist: check the markers.**: check the pelvis and hip markers of the dress, then split again.
* **The garment has no thigh weights to bridge yet.**: fit the cloth to the body or transfer the weights first.
* **This region is not part of the chosen garment type.**: pick one of the regions your garment type covers.
* **There is no backup yet.**: a backup is kept before the first step that changes the garment.
* **Fix Spikes compares with the backup from before fitting, and there is none with the garment's current vertices ...**: **Prepare Garment** or an edit that added or removed vertices came after the fit. Use **Fix Spikes** right after the fit, or fix the spikes by hand under **Fix by Hand**.
* **Body Cut, Arms and Legs need the Reference Data Pack.**: add the body with **Add Freemode Body** while signed in. A body from a file cannot use these options.
* **gta.clothing noticed something about the result (...). A newer version of the add-on explains it.**: update the add-on, see [Blender](https://docs.gta.clothing/plugins/creator-link/blender.md#settings-updates-and-uninstalling).
* **Checking tears needs an armature and weights on the garment.**: weight the cloth first, see [Game Ready](https://docs.gta.clothing/plugins/creator-link/blender/game-ready.md#weight-the-cloth).

Next: [Game Ready](https://docs.gta.clothing/plugins/creator-link/blender/game-ready.md).
